1 - brake disc
It is necessary to replace both disks of one bridge. To remove, first unscrew the support mount. Remove the brake disk from the wheel hub without using force, if necessary, use a rust converter.
2 - Phillips head screw, 4 Nm.
3 - brake pads
With wear sensor. Replace all pads of one bridge at once.
4 — brake caliper
5 - lower bushing
6 - lower clip
7 - lower spacer sleeve
8 — hexagon socket head bolt, lower, 25 Nm
9 - Air flow guide
10 - Hexagon head bolt, 10 Nm
11 — Allen head bolt, upper, 25 Nm
12 — upper spacer sleeve
13 — upper clip
14 — upper bushing
15 — unloading sleeve
16 - brake hose
With ring nipple and hollow bolt, 35 Nm.
17 - wheel hub Can be pressed out.
18 - Hexagon head bolt, 10 Nm
19 - protective screen
20 — steering knuckle
21 — ABS speed sensor
Before installing the sensor, clean the inner surface of the hole and lubricate it with plastic grease G000650.
22 - Allen head bolt, 8 Nm
The article is published on this resource [VWmanual.ru]
Visitor comments