Caution: Fuel vapors are poisonous and flammable, therefore good ventilation of the workplace is required. Do not make open fire. Fire hazard!
Removing
Disconnect ground wire from battery.
Close the fuel hose from the fuel pump with a clamp: in the figure on the left - to the filter - on the right.
Disconnect the fuel hose going to the engine from the filter.
Unscrew the filter bracket and pull out the filter with the fuel hose.
Disconnect the fuel hose from the filter, after releasing the clamp. If the hose is secured with a tie-down band, cut it. When installing, install a screw clamp.
Installation
Connect the fuel hose going to the engine to the filter and secure with a clamp.
Attention: The arrow on the filter housing must point to the engine, see illustration.
Connect the disconnected fuel hose to the filter and secure with a clamp.
Insert the fuel filter and screw it on with the bracket.
Remove clamp from hose.
Start the engine and check the hose connections.
Visitor comments