2. Remove the heat shield by unscrewing the bolts (arrows).
3. Unscrewing the bolts (14), disconnect the lower support of the power unit from the gearbox.
4. Remove the mounting bolts: steering gear (3 and 6), stabilizer (11 and 16) and subframe (4, 5, 12, 15).
5. Installation is carried out in the reverse order.
Tightening torques:
- Steering gear mounting bolts (3 and 6): 50 Nm + 90°
- Subframe Bolt (4, 5, 12, 15): 70 Nm + 90°
- Stabilizer mounting bolts (11 and 16): 20 Nm + 90°
Visitor comments