CAUTION: Adding undistilled water or electrolyte will damage the battery. Top up with distilled water only. If the cans are overfilled, the battery may be damaged. To top up, use only the K4S 5045 battery filler. The design of the device prevents the battery from overfilling the cans.
Check the electrolyte level in the battery.
Switch off the ignition and all electrical consumers.
If available, remove the protective film from the corks of the cans.
Unscrew the stoppers of the jars.
Top up with distilled water using the battery filler VAS 5045. When filled to the maximum level, the distilled water supply is automatically cut off.
Check plugs and O-rings for damage. Replace damaged parts.
Close the jars with corks.
Check battery open circuit voltage.
Take a test drive.
Visitor comments