remove the engine cover and unscrew the nut on the end cover of the air cleaner (see photo).
Photo 2.1. Unscrew the nut on the end cover of the air cleaner.
2. Remove the end cover.
3. Unscrew the nut securing the air filter and pull out the filter (see photos).
Photo 2.3A. Unscrew the nut securing the air filter.
Photo 2.3B. Removing the air filter.
4. Blow the filter with compressed air from the inside out.
5 Wipe the air cleaner housing clean and replace the filter.
6. At the frequency specified in the section "Routine maintenance" at the beginning of this manual, the air filter should be replaced. When installing a new filter, check that the filter extension gasket is in good condition.
7. To completely remove the air cleaner, you must disconnect the air preheating channel from the casing on the exhaust manifold.
8. Disconnect the air intake ducts from the carburetor and cold air intake (see photos).
View the original on the website: www.VWManual.ru
Photo 2.8A. Disconnecting the cold air duct from the air cleaner.
Photo 2.8B. Disconnecting the air intake duct from the carburetor.
9. Loosen the air cleaner retaining clip and remove the air cleaner from the engine compartment (see photo).
Photo 2.9. Air cleaner mounting clamp.
10. Installation of the air purifier is carried out in reverse order.

Visitor comments