Removing
1. Remove check valve (1) from the oil filler neck.
2. Carefully lift the oil filler neck and turn it in the direction (arrows).
3. Remove the oil filler neck from the camshaft housing.
Installation
1. Insert the oil filler neck into the camshaft housing.
2. Turn it against the direction (arrows), to the oil filler groove (3) fixed on the toe (2) on the camshaft housing.
Attention! To make the oil filler groove (3) was able to fix in the toe (2) on the camshaft housing, the oil filler neck must be raised again.
Visitor comments