Visual inspection of the brake system for leaks and damage (VW Caddy 3)

Check the following components for leaks and damage:

master brake cylinder,
brake booster (if there is ABS - and a hydraulic unit),
brake force regulator and brake calipers.

Check the brake hoses for porosity and degree of rubber hardening.

Check the brake hoses and brake lines for wear.

Also check the brake hose connections and fastenings for correct position, tightness and absence of corrosion.

Caution: Make sure that the brake hoses are not kinked. In addition, it is necessary to ensure that when the steering wheel is turned to its maximum, the brake hoses do not touch the vehicle components.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The text has been checked: Kolesnikov Artem

Previous articles
Checking the brake fluid level
Checking the wear status of tires
Checking battery voltage without load
Checking the electrolyte level in the battery
Visual inspection of the battery
Lifting a car using a lifting platform and a jack

Next articles
Checking the thickness of disc brake pads
Visual inspection of constant velocity joint (CV) boots
Checking the tie rod ends
Checking the power steering fluid level
Visual inspection of axle joints
Visual inspection of parts in the engine compartment and on the bottom

Visual inspection of the brake system for leaks and damage (VW Caddy 3)

Visitor comments