1 - return fuel line
From TNVD. Blue or respectively with blue markings.
2 - fuel supply line
To the injection pump. White or respectively with white marking.
3 - clamp*
4 - control valve
Installation position: the arrow must point towards the fuel tank. When replacing the filter, remove the clamp and remove the control valve together with the attached hoses.
At temperatures below +15°C: the fuel flow through the filter is open.
At temperatures above +31°C: the fuel flow through the filter is closed.
5 - return fuel line
To the fuel tank. Blue or respectively with blue markings.
6 - fuel supply line
From the fuel tank. White or respectively with white marking.
7 - fuel filter
Before installation, fill to the brim with diesel fuel.
8 - seal
Replace if damaged.
9 - plug for removing water
10 - bolt, 25 Nm
11 - fuel filter holder
12 - insert
*) ensure fastening strength
Visitor comments