Warning: The noises that occur when the seat belt is retracted are functional. Never use oil or grease to eliminate the noise. Do not disassemble the automatic seat belt retractor mechanism. Risk of accident!
Pull the seat belt out completely and check it for torn fibres.
Damage may occur, for example, as a result of the belt being pinched or melted by a burning cigarette. In this case, the belt must be replaced.
If there are abrasions without torn fibers, there is no need to replace the belt.
The original article is available at (VWManual.ru)
If the belt is difficult to move, check for twisting; if necessary, remove the trim from the middle pillar and route the belt correctly.
If the automatic seat belt retractor mechanism does not function, replace the belt.
Clean the belts only with soap and water; never use solvents or chemical cleaning agents.
Visitor comments