Contents: Removal ↓ Installation ↓
Heating regulator
Removal
1. Remove the control handles (4) from the levers.
2. Remove the shield (3).
3. Unscrew the screws from the instrument panel (2).
4. Press the regulator (1) into the instrument panel and remove it together with the connected cables from below the instrument panel.
5. Disconnect the heating cables.
Installation
1. Install the cables onto the removed regulator.
2. Install the regulator at the bottom of the instrument panel in place and screw it on.
3. Insert the shield.
4. Attach the control handles.
Visitor comments