(1) headlight insert
(2) setting ring
(3) headlight height and direction adjustment
(4) clamping ring. Only for 12V 45/40W lamp
(5) protective cap
(6) bearing ring
(7) incandescent lamp
(8) chuck with o-ring
(9) sidelight lamp
Dismantling
Turn the clamping pins on the radiator grille 90 degrees, remove the grille.
Remove 3 screws.
Pull out the headlight, take out the lamp, see above.
Installation
Insert the bulb into the headlight.
Attach the headlight with three screws.
Install the radiator grille, clamping pins turn 90 degrees.
Send headlight for adjustment.
Visitor comments