Contents: Removal ↓ Installation ↓
The anti-roll bar is shown in the figure 6.13.
Figure 6.13. Anti-roll bar: 1.10- Brackets for anti-roll bar; 2, 9, 13 - Nuts; 3, 4, 11 - Bolts; 5 - Anti-roll bar arm; 6 - Clamp; 7 - Anti-roll bar; 8 - Rubber support; 12 - Bracket for the parking brake system drive cable.
Removal
1. Unscrew nuts 2 and remove the mounting bolts from the rear axle beam (figure 6.14). Loosen bolts 1 only when replacing rubber mounts.
The original article is posted on the website [VWMANUAL.ru]
Figure 6.14. Unscrew nuts 2 and remove the mounting bolts from the rear axle beam. Loosen bolts 1 only when replacing rubber mounts.
2. Disconnect the anti-roll bar C from the arm B and remove the anti-roll bar (figure 6.15).
Figure 6.15. Disconnect anti-roll bar C from arm B and remove the anti-roll bar.
Installation
3. Installation is carried out in the reverse order of removal.
Visitor comments