Electric mirror
Using a plastic wedge, release the upper edge of the triangular cover "3" from the door frame and pull it out of the lower holders with an upward movement. 1 - mirror housing, 5 - insulating gasket, 6 - mirror glass.
Disconnect plug connector "4"
Unscrew screw "2" and remove the mirror together with the bracket from the outside of the door.
When installing, tighten the mirror mount to a torque of 10 Nm.
Manual mirror
Using a plastic wedge, release the upper edge of the triangular trim "8" from the door frame and pull it out of the lower holders with an upward movement. 1 - mirror glass, 2 - mirror housing.
Release the adjusting mechanism "3" from the holder at the inner door handle "5" and remove it from the door trim together with the rod "6". 4 — adjusting handle.
Unscrew screw "7" and remove the mirror together with bracket "9". At the same time, pull rod "6" together with adjustment mechanism "3" out of the door.
When installing, tighten the mirror mount to a torque of 10 Nm.
Mirror housing
Remove the mirror glass, see the corresponding chapter for POLO.
Fold the back of the mirror inward, pull the mirror housing back "arrow" and unfasten it from the bracket.
[The article is posted on the portal www.vwmanual.ru]
When installing, place the mirror housing on the bracket and secure it.
Visitor comments