Gasoline vapor recovery system with carbon filter (VW Polo 3)

The gasoline vapor recovery system with a carbon filter is shown in Fig. 3.26.

Fig. 3.26. Gasoline vapor recovery system with carbon filter:
1 - Retaining ring; 2 - Bracket; 3 - Solenoid valve; 4 - Wiring connector; 5 - Adapter; 6 - Throttle body; 7 - Active carbon filter; 8 - Ventilation tube.

(The information is presented on the website: www.VWmanual.ru)

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The text has been checked: Kolesnikov Artem

Previous articles
Checking the fuel pump
Adjusting the accelerator cable
Power supply system
Cooling system
Checking oil pressure and oil pressure sensor
Lubrication system

Next articles
Exhaust gas system
Fuel injection and ignition control system
Self-diagnosis of the injection system
Connecting the VAG 1551 fault code reader
Checking and clearing fault memory
Reading the measured value block and basic settings

Similar articles from other manuals for VW cars:
Fuel filter — preheating system Passat B3 (1988-1993)
Identifying and troubleshooting gasoline injection system faults Golf 5 (2003-2008)
Emergency alarm system Touareg 1 (2002-2006)
Front part of the exhaust system with diesel particulate filter Tiguan 1 (2007-2015)
Checking the operation of the lighting system Sharan 1 (1995-2000)
Activated carbon system Transporter T4 (1990-2003)
Exhaust system components with a BLS engine particulate filter Caddy 3 (2003-2010)

Gasoline vapor recovery system with carbon filter (VW Polo 3)

Visitor comments