The bonnet, trunk lid and doors are bolted on and can be easily replaced. When installing, it is necessary to maintain the correct clearances. This means that the distance between the body parts along the entire length of the gap must be the same, otherwise, for example, the door rattles or increased wind noise may occur during movement.
Safety measures during welding
When carrying out welding or other work with sparking near the battery, it must be removed.
Air conditioning parts must not be welded or soldered. This also applies to welding and tinning work on the machine and if there is a risk of heating parts of the air conditioner. When carrying out repair paintwork, the temperature of the object in the drying oven or in the preheating zone should not exceed +80°C.
Visitor comments