Removal
Screw a standard M8x1.5 bolt into the valve approximately 4 turns -arrow-, and pull the valve out of the hole.
Installation
Before installation, wet the O-ring with engine oil. Press the valve into the oil channel by hand (fig. 2.251).
(The information is posted on this resource: «vwmanual»)
Markings on the oil dipstick
1 - Max mark.
2 - Min mark.
a - Oil level from the grooved area to the maximum mark: Do not add engine oil.
b - Current level in the grooved area: Engine oil can be added.
c - Level from the minimum mark to the grooved area: add no more than 0.5 l of engine oil.
Visitor comments