Low frequency loudspeaker/POLO
Removal
Remove the door trim.
Disconnect the speaker plug.
Using a suitable drill, drill out the 4 rivets and remove the defective speaker.
(The text is copied from this portal: VWMANUAL.ru)
Remove metal shavings from the door. Restore any damaged varnish coating.
Installation
Secure the new speaker using a standard riveting tool or sheet metal screws.
Connect the speaker plug.
Install the door trim, don't forget to install the rubber ring between the speaker and door trim.
Note: The high-frequency speakers at the front and rear are rigidly installed in the A-pillar trims or the rear doors, respectively, and cannot be removed separately.
Visitor comments