Removing
Switch off the ignition.
Remove the shift lever cover from the lining.
For greater clarity, the steering wheel, parking brake lever boot and gearshift mechanism are not shown in the figures, the removal of these components is not required.
Open the glove box on the driver's side and unscrew the two screws (1) (1.5 Nm).
Unscrew the screw in the front passenger's footwell (2) (1.5 Nm).
Remove from ashtray (3) insert (1).
Remove the screw (2) (1.5 Nm).
Remove the ashtray from the center console and disconnect the existing wiring harnesses.
Remove mat (4) from the front storage compartment (5).
Remove the front storage compartment and disconnect the existing wiring harnesses (6).
Remove three screws (1) (1.5 Nm).
Set the gear lever to the rearmost position.
Release the locks and remove the front part of the center console.
Installation
Installation is carried out in the reverse order.
Visitor comments