Mirror without rain sensor
Removal
The mirror together with the base -1 - is pressed away from the holder with a downward diagonal movement "arrow" and thus the locking springs in the base "1" are released.
Base-1-together with the mirror, rotate at an angle of 60° to 90° relative to the mounting position, place it against the holder and turn the "arrow" until it locks into place.
Installation
Turn base "1" together with the mirror at an angle of 60 to 90 relative to the mounting position, place it against the holder and turn the "arrow" until it locks into place.
Mirror with rain sensor
Removal
Press the covers on the left - 1 - and on the right - 5 - away from each other and remove.
Remove plug connector "3" from mirror base "4" and disconnect.
Remove mirror "6" together with base "4" from holder "2" with downward movement "arrow".
Installation
Installation is carried out in reverse order.
Visitor comments