Caddy
Removal
1. Remove the panel above the left rear wheel.
2. Remove the pump with insulation 1 (fig. 13.10).
3. Disconnect the multi-pin wiring connector 1 and the discharge tube 2 from the pump (fig. 13.11).
Installation
4. Installation is carried out in the reverse order of removal.
Polo Classic
Removal
5. Remove panel 1 above the right rear wheel in the luggage compartment (fig. 13.12). Move the retainer 2 back (arrow). Disconnect the drain pipe 4 from the hole in the body. Remove the pump with insulation 3.
6. Disconnect the multi-pin wiring connector 1 and the discharge tube 2 from the pump (fig. 13.11).
Installation
7. Installation is carried out in the reverse order of removal.
Polo Estate
Removal
8. Remove the panel on the luggage compartment floor.
(The information is posted on this resource: www.vwmanual.ru)
9. Remove the pump with insulation 1 (fig. 13.13).
10. Disconnect the multi-pin wiring connector 1 and the discharge tube 2 from the pump (fig. 13.11).
Installation
11. Installation is carried out in the reverse order of removal.
Visitor comments