Removing
1. Remove the cover in space 1 (pic. 12.51).
2. Remove the decorative panel from the controls (arrows) (pic. 12.52).
3. Loosen the screws (arrows) (pic. 12.53).
4. Remove the casing under the steering wheel.
5. Remove the central console.
6. Disconnect Control Cables from Adjusters (arrows) (pic. 12.54). Disconnect wiring connectors 1 and 2.
7. After removing the regulators, check the operation of the control cables. To do this, move the lugs in the direction of the arrows (pic. 12.55).
8. Replace damaged or worn cables.
Installation
9. Installation is carried out in order. reverse withdrawal.
Attention! Cable bushings are color coded. All shutters must move as far as they will go when the knobs are turned.
10. Bend the end of the cable 1 and press it into the drive lever 2 (arrow) (pic. 12.56).
11. Press cable 1 into blocking device 2 (pic. 12.57).
The cable of the air supply flap to the legroom/defrosting: left-hand steering - green, right-hand steering - black.
Central damper cable: left-hand drive - yellow, right-hand drive - brown.
Temperature regulator cable - red, left-hand drive - beige, right-hand drive - white.
Visitor comments